Key Reminder Sound This changes the frequency of the key reminder buzzer.This will also turn on the interior light, ignition light and step light on when the door is unlocked by the door key cylinder. Interior Lighting This will turn the interior light on when the ignition switch is turned from “ACC” to “LOCK”.Idle Learn Reset Resets the Idle RPM to factory setting.Horn Chirp on Lock The vehicle horn will sound each time the doors are locked by a remote control unit while this feature is enabled.Horn Chirp Length Adjust the length of the horn chirp to either short or long when vehicle is locked using the remote control unit.Headlight Delay Set the amount of time that the head lamps remain on after the engine has been turned off.Headlight Approach Timer Adjust the length of time the lights remain on when a vehicle is unlocked using the remote control unit.Foot Light This sets the time the Outer Foot Light is on.Fog Light/High Beam Run the fog lights and the high beams at the same time.This will change the Entry Delay Time, or the period before starting the warning, by the Passive Mode. Entry Delay This will turn the Glass Break Sensor ON or OFF.(This feature does not take effect until the GT returns to the Main Gauge Screen.) † The coolant temperature light will not indicate if the vehicle begins to overheat when the fan is disabled. Engine Fan Enable or disable† the engine fan regardless of coolant temperature.ECT Reset This function is used to delete what the Electronic Controlled Transmission has learned.On This changes the brightness when dimming the indicator light of the combination meter, A/C indicator light and clock. Off This changes the brightness when canceling the lights for the indicator light of the combination meter, A/C indicator light and clock. Unlike the button on the dash, the traction control will stay off until the setting on the GT is changed even if the vehicle is turned off. Disable Traction Control Disable the traction control.Daytime Running Light Disable or enable daytime running lights.CAM Variation Relearn Helps the customer relearn the CAM variation after a Computer Swap or Complete computer flash.Axle Lockers (2WD and 4WD-Hi) Easily engage the wheel lockers for offroad traction. Auto Unlock on Shift Unlock the doors by shifting the lever to P range from other than P range when the ignition is ON.Auto Lock on Shift Lock the doors when the lever is shifted from P range to a range other than P.Auto Lock Lock the doors when the vehicle reaches to a certain speed.Once the vehicle comes to a stop, if the driver’s door is the first to open, then all other doors will automatically unlock. Auto Door Lock Enable the vehicle to automatically lock all the doors any time it reaches a speed of 15 mph.Accessory items include the radio, cigarette lighter, etc. Accessory Delay Control how long accessory items will remain on after the engine has been turned off and the doors remain closed.When this setting is switched OFF, the key UNLOCK button will unlock all the doors. 2 Turns Open All Doors This unlocks only the driver door when the key UNLOCK button is pushed twice.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |